- Inquiry
產品參數
其他型號
關于產品
Product Information
Jack Stands are designed to support rated capacity, partial vehicle loads
consisting of one end of a vehicle. Use both stands for each operation.
Product Parameters
|
Model |
T43002X |
Capacity |
3 Ton |
|
Min. Height |
270 mm |
Max Height |
410 mm |
|
Product Size |
/ |
Package Size |
195x180x330 mm |
|
N.W./G.W. |
5.9/6.2 kg |
QTY/20'CY |
2352 Pairs |
Features
• Ratchet type axle stand with cast iron support post and tough welded steel plate base.
• Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked.
Common Problems And Solutions
Storing the Equipment
1. Store in a dry location, recommended indoors.
2. Equipment should be stored in an area where they will not be subjected to damage.
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.
6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.
成分-
優質液壓油，防止漏油
液壓系統采用高質量的油，提供更好的耐腐蝕性和高/低溫靈活性，允許單元在40華氏度和105華氏度之間的溫度下運行。
自動焊接
該閥采用細鋼焊接而成，操作方便，密封性好，性能可靠，具有自動鎖氣滴料功能。
高密度鋼材
由高級鋼材制成，并按照嚴格的質量和耐用性標準建造。
你可能也喜歡
型號
15噸專業液壓車間壓力機
10Ton液壓車間壓力機
30 ton氣動液壓瓶千斤頂
35TonPneumatic Hydraulic Bottle Jack
2Ton Hydraulic Trolley Jack
1.5/2Ton Hydraulic Trolley Jack
特點
? 安全閥
? 工業密封件
? 機器人焊接
? 激光切割框架
? 可拆卸零件托盤
? 雙速泵
? 重型H型框架由高級鋼制成，并按照嚴格的質量和耐用性標準建造
? 在徹底的化學清洗后應用無鉛漆面，以確保持久的光潔度并幫助防止生銹
? 油漆是油，油脂和污垢，易于清理
? 高質量的大直徑液壓鋼缸單元導致提高負載所需的較低油壓，有助于減少磨損并延長使用壽命
? 活塞閘板經過處理和拋光，以防止打滑
? 活塞-ram采用帶支撐環的y型聚氨酯密封圈，防止負載緩慢下降或繞過油漂移
? 液壓系統采用高質量的油，提供更好的耐腐蝕性和高/低溫靈活性，使設備能夠在40華氏度和105華氏度之間的溫度下運行
? 超長手柄包括容易抽吸力
? 專為大量商業用途而設計。
? 快速高效的空氣泵減少提升時間。
? 硬化合金電鍍ram最大的耐久性。
? 帶集成過濾器的空氣閥，密封液壓單元。
? 重型空氣馬達提供最大功率。
? 防止污染。
? Designed for heavy commercial use.
? Fast efficient air pump reduces lifting time.
? Hardened alloy-plated ram for maximum durability.
? Air valve with integrated filter, seal hydraulic unit.
? Heavy-duty air motor provides maximum power.
? Prevents contamination.
? The hydraulic technology makes lifting simple while a wider frame and internal bypass valve ensure safety.
? Safety bypass system prevents over-loading and ensures safe operation.
? Steel casters for longevity.
? The hydraulic technology makes lifting simple while a wider frame and internal bypass valve ensure safety.
? Safety bypass system prevents over-loading and ensures safe operation.
? Steel casters for longevity.